Plastic, resin

3DM Impact, Plastic 3D Printing

For tough and at the same time flexible parts

3D Druck - Bauteil - Material Kunststoff 3DM Impact
3D Druck - Reif - Material Kunststoff 3DM Impact



  • Tensile strength: 58 MPa (ISO 527-2/93)
  • Modulus of elasticity: 2700 MPa (ISO 527-2/93)
  • Elongation at break: 22% (ISO 527-2/93)
  • Flexural strength: 70 MPa (ISO 178/01)
  • Flexural modulus: 2300 MPa (ISO 178/01)
  • Hardness: Shore 78-82D (ISO 868)
  • Heat deflection temp (at 0.45 MPa): 55 °C (ISO75-2/04)

Material Color



High performance parts such as:

  • Snap-fits
  • Electrical housings
  • Fixtures and tools


  • Tough and flexible at the same time
  • Shape memory effect (depending on temperature)

The material 3DM-IMPACT is especially suitable for parts that require high toughness combined with good flexibility. Due to its high impact strength, the material is particularly resistant to shocks and impacts. Thus, this material is ideally used for high-performance parts such as snap-fits, electrical housings, fixtures and tools. In addition, the 3D printing material has the ability of the shape memory effect, depending on the temperature.